Mondraker Foxy Carbon R 29 ", cherry red / carbon
Mondraker Raze Carbon R 29 bike, carbon/gloss black/racing silver
5,799 €
RRP 6,399 €
-10% Mondraker Raze Carbon R 29 bike, racing silver/orange
from 4,499 €
-10%
RRP 6,799 €
-10% Mondraker Foxy Carbon R 29 bicycle, cherry red/carbon
5,399 €
-10%
RRP 5,999 €
Fork: Fox 36 29 Float FIT GRIP EVOL Rhythm, 160mm, tapered steerer tube, Boost 15x110mm axle, offset 44mm. Settings: sweep adjust compression, low-speed rebound, air preload
Muffler: Fox Float X LV EVOL Performance, 205x65mm. Settings: compression 2 positions lever, low-speed rebound, air preload. Trunnion top mount, 22.2x10mm bottom bushings
Front cover: Maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX TERRA compound, EXO + protection, 120TPI, folding bead
Back cover: Maxxis Minion DHR II 29x2.40 WT, tubeless ready, 3C MAXX TERRA compound, EXO + protection, 120TPI, folding bead
Front hub: DT Swiss 370, 15x110mm, IS 6 bolts
Rear hub: DT Swiss 370, Boost 12x148mm, Ratchet LN system, IS 6 bolts
Rims: DT Swiss E1900 Spline 29, 30mm internal width, sleeved aluminum, tubeless ready, 28 spokes
Chain: Sram NX Eagle, 12s, Powerlock
Gear: Sram Trigger NX Eagle, 12s, X-Actuation 1: 1
Cranks: Truvativ Descendant 6K Eagle, Boost, OAK axle, Direct mount chain ring, S / M size: 170mm, L / XL size: 175mm
Converters: 32T, steel, X-Sync 2
Cassette: Sram XG-1230, 11-50T, 12p
Derailleur: Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1: 1
Brakes: Sram G2 RS, 4-piston caliper
Front disc: Sram Centerline 200mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads
Rear disc: Sram Centerline 180mm IS 6 bolts one-piece rotor, steel-backed organic pads
Stem: Onoff Sulfur FG 30mm 0º, 6061 forged alloy, 31.8mm barbore
Handlebars: Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 800mm, 9 ° backsweep, 5 ° upsweep, 31.8mm barbore
Grips: Onoff Diamond, 1lock-on, 135mm
Head composition: Acros custom for 1-1 / 2 "head tube, angular contact bearings 40x52x7, Internal cable routing
Center composition: Sram OAK BSA, sealed bearings, 73mm
Seatpost : Onoff Pija dropper internal, diameter 31.6mm, S size: 387x125mm, M / L size: 425x150mm, XL size: 465x170mm
Saddle: SDG BEL-AIR 3.0, LPU foam, steel rails
Carbon frame
Lightweight, stiff and at the same time still flexible material that absorbs shocks well and increases comfort. A higher price is to be expected.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Model year | 2022 |
| Gears | 1x12 |
| Groupset | SRAM NX |
| Material | carbon fiber |
| Brakes | Hydraulic disc brakes |
| product ID | 177255 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Sale -11% FORCE MTB Warrior Carbon cycling shoes, black
from 123 €
-11%
RRP 204 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
