Mondraker Foxy Carbon R 29, model 2020, red
Fork: Fox 36 Float 29 GRIP 3Pos Performance Boost, stroke 160 mm
Muffler: Fox Float DPX2 LV EVOL Performance, 205x62.5 mm. Settings: 3-position compression, low-speed rebound, air preload. Trunnion mount, 22.2x10 mm sliding sleeve
Head composition: ONOFF Titan Internal tapered, bearings 1-1 / 8 "- 1/5"
Derailleur: SRAM NX Eagle X-Horizon Type 3 1x12 speed
Gear: SRAM NX Eagle Trigger right 12 speeds
Brakes: Shimano MT-520, 4-piston, 203/180 mm RT-66 discs with 6-screw mounting, organic plates (resin)
Brake levers: Shimano MT-520 Servowave
Cranks and transducers: SRAM NX Eagle DUB Boost DM 32 teeth
Middle composition: SRAM OAK BSA 73 mm
Handlebars: ONOFF Sulfur 1.0, width 780 mm
Stem: ONOFF Sulfur FG30 0º
Seatpost : ONOFF internal drink 1x lever, telescopic
Saddle: SDG Fly MTN
Front hub: DT Swiss 370, 15x110 mm, IS 6-bolt
Rear hub: DT Swiss 370, 12x148 mm, IS 6-bolt
Chain: SRAM NX Eagle
Cartridge: SRAM PG-1230 11-50 teeth, Eagle, 12 speed
Tip: DT Competition Straight pull
Wheels: Dt Swiss E1900 Spline 29, rim width 30 mm, entwined set
Tires: Maxxis Minion DHR II 29, width 2.4 WT 3C / EXO / TR MaxxTerra / Maxxis Aggressor 29, width 2.30 EXO / TR
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM NX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 88517 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews