Mondraker Foxy Carbon R 29 bicycle, cherry red/carbon
Mondraker Foxy Carbon R 29 bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Frame |
Foxy 29 Stealth Air full Carbon, Zero Suspension System, 150 mm travel, Forward Geometry, aluminum CSC upper link with carbon bridge, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetrain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. *Optional Geometry Kit. Without MIND device.
|
Fork |
Fox 36 29 Float FIT GRIP EVOL Rhythm, 160 mm, tapered steerer tube, Boost 15x110 mm axle, offset 44 mm. Settings: sweep adjust compression, low-speed rebound, air preload
|
Shock absorber |
Fox Float-X LV Performance, 205x65 mm. Settings: compression 2 positions lever, low-speed rebound, air preload. Trunnion top mount, 30x8 mm bottom bushings
|
Shifting |
Sram Trigger NX Eagle, 12s, X-Actuation 1:1
|
Derailleur |
Sram Trigger NX Eagle, 12s, X-Actuation 1:1
|
Cassette |
Sram XG-1230, 11-50T, 12s
|
Chain |
SRAM NX Eagle, 12s, Powerlock
|
Cranks |
Truvativ Descendant 6K Eagle, Boost, DUB axle, Direct mount chain ring, S/M size: 170 mm, L/XL size: 175 mm
|
Brake levers |
Sram G2 R, tool-free reach adjust
|
Rims |
DT Swiss E1900 Spline 29, 30 mm internal width, sleeved aluminum, tubeless ready, 28 spokes
|
Front hub |
DT 370, Boost 15x110mm, IS 6 bolts
|
Rear hub |
DT 370, Boost 12x148 mm, 18T Ratched LN system, IS 6 bolts
|
Spokes |
DT Champion, straightpull
|
Tires |
F: Maxxis Minion DHF 29x2.5" WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120 TPI, folding bead,
R: Maxxis Minion DHR II 29x2.4" WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120 TPI, folding bead |
Seatpost |
Onoff Pija dropper internal, diameter 31.6 mm, S size: 387x125 mm, M size: 425x150 mm, L/XL size: 465x170 mm
|
Saddle |
SDG BEL-AIR 3.0, LPU foam, steel rails
|
Stem |
Onoff Sulfur FG 30mm 0º, 6061 forged alloy, 31.8 mm barbore
|
Handlebars |
Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20 mm, width: 800 mm, 9º backsweep, 5º upsweep, 31.8 mm barbore
|
Headset |
Acros custom for 1-1/2" head tube, angular contact bearings 40x52x7, Internal cable routing
|
Bottom bracket |
SRAM DUB BSA, sealed bearings, 73 mm
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | SRAM NX |
Colour | cherry red/carbon |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Air |
Rear travel | 150 mm |
Telescopic seat post | yes |
product ID | 191841 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews