Mondraker F-Podium DC Carbon, blue/white/orange, model 2021
Frame: F-Podium 29 Stealth Air Full Carbon, XCO Optimized Zero Suspension System, 100mm, XC Forward Geometry, Carbon Monoblock upper link, BSA bottom bracket, tapered head tube, HHG internal cable routing, dedicated 1X DRIVETRAIN design, Boost 12x148mm rear axle , shock Mudguard, postmount rear brake mount.
Fork: RockShox SID Select RL 29, 120mm, Charger, Debonair, tapered steerer tube, Boost 15x110mm axle, 35mm tapered aluminum stanchions, offset 44mm. Settings: OneLock 2 position remote compression (open / lock), low-speed rebound, air preload
Headstock : Acros AZX-239 R1 Block Lock, ZS44/28.6 top, ZS56/40 bottom
Derailleur: Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1:1
Shifting: Sram Trigger SX Eagle, 12s, X-actuation 1:1
Brake levers: Sram Level T, Direct Link actuation, tooled reach adjust, lever pivot bushings
Cranks and derailleurs: Truvativ Stylo 6K Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S size: 170mm, M / L / XL size: 175mm
Center assembly: Sram DUB BSA, sealed bearings, 73mm
Handlebars: ONOFF Sulfur 0.2, double butted 6061 alloy, rise: 4.8mm, width: 760mm, 9 backsweep, 0 upsweep, 31.8mm Barbore ONOFF Twin, 1lock-on, 135mm
Stem: MDK, 6061 T6 Alloy, 31.8mm Barbora, rise: +/- 5, length: sizes S/M: 50mm, size L: 60mm, size XL: 70mm
Seatpost : ONOFF pija dropper internal, diameter 31.6mm, S size: 337x100mm, M/L/XL size 387x125mm
Saddle: Fizik Antares R7
Front hub: DT 370, Boost 15x110mm, IS 6 bolts
Rear hub: DT 370, Boost 12x148mm, 3 Pawl system, IS 6 bolts
Chain: Sram SX Eagle, 12s, Powerlock
Cassette: Sram PG-1230, 11-50T, 12s
Tip: DT Champion, straight pull
Rims: DT Swiss X1900 Spline 29, 25mm internal width, sleeved aluminum, tubeless ready, 28 Spokes
Tire: Maxxis REKON Race 29x2.35, EXO protection, tubeless ready, 120TPI, folding bead
Model year | 2021 |
Gears | 1x12 |
Groupset | SRAM GX, SRAM SX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 118505 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews