Mondraker F-Podium Carbon RR 29 bike, carbon/polaris/racing silver
Mondraker F-Podium Carbon RR 29 bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Frame |
F-Podium 29 Stealth Air Full Carbon, XCO Optimized Zero Suspension System, 110 mm, XC Forward Geometry, Carbon Monoblock upper link, BSA bottom bracket, tapered head tube, HHG internal cable routing, dedicated 1X drivetrain design, Boost 12x148 mm rear axle , shock mudguard, postmount rear brake mount.
|
Fork |
Fox 34 Step Cast Float FIT4 EVOL Factory Kashima, 120 mm, tapered steerer tube, 15x110 mm Boost Kabolt axle, offset 44 mm. Settings: remote 3pos Push to lock, compression micro-adjustment at low-speed, rebound, air preload Fox 3 position dual pull push to lock
|
Shock |
Fox Float SL Factory Kashima SV EVOL, 165x45 mm. Settings: 3 position remote compression (open/medium/lock), low-speed rebound, air preload. Trunnion top mount, 30x8mm bottom bushings
|
Shifting |
SRAM GX Eagle, 12s
|
Derailleur |
SRAM X01 Eagle, Type 2.1 roller bearing clutch, cage lock, long carbon cage, 1x12s, X-actuation 1:1
|
Cassette |
SRAM XG-1275, 10-52T, 12s
|
Chain |
Sram GX Eagle, 12s, Powerlock
|
Cranks |
SRAM X1 Carbon Eagle, Boost, DUB axle, Direct mount chain ring, S size: 170 mm M, L, XL size: 175 mm, CL 55
|
Brakes |
SRAM Level Bronze 2P Stealth, 2 piece caliper, Centerline 180 mm/160 mm IS 6 bolts one-piece rotor, steel-backed organic pad
|
Rims |
Mavic CrossMax Carbon XL R, 29 Boost 30 mm internal width, hookless, tubeless ready, 24 spokes
|
Front hub |
Mavic Infinity hub, Boost 15x110 mm, IS 6 bolts
|
Rear hub |
Mavic Infinity hub, ID360 freewheel technology, Boost 12x148 mm, IS 6 bolts, XD freehub
|
Spokes |
Mavic 24 straight-pull double butted spokes
|
Tires |
Maxxis Rekon Race 29x2.4" EXO TR 120 TPI
|
Seat post |
Onoff Pija dropper internal, diameter 31.6 mm, Universal lever, S size: 405x95-125 mm, M size: 458x120-150 mm, L size: 498x140-170 mm, XL size: 498x140-170 mm
|
Saddle |
Fizik Vento Argo X5
|
Stem |
MDK, 6061 T6 Alloy, 31.8 mm barbore, rise: +/-5°, length: S, M size: 50 mm, L size: 60 mm, XL size: 70 mm
|
Handlebars |
Onoff Helium Carbon 0.2, rise: 4.8 mm, width: 760 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore
|
Headset |
Acros custom for 1-1/2" head tube, angular contact bearings 40x52x7, Internal cable routing
|
Bottom bracket |
Sram DUB BSA, sealed bearings, 73 mm
|
Sex | Men, Unisex |
Model year | 2024 |
Gears | 1x12 |
Groupset | Other |
Size | S, M, L, XL |
Colour | carbon/polaris/racing silver |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 120 mm |
Shock | Air |
Rear travel | 110 mm |
Telescopic seat post | yes |
product ID | 254348 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews