Mondraker F-Podium Carbon 29 bike, carbon/carrera blue/midnight blue
Mondraker F-Podium Carbon 29 bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Frame |
F-Podium 29 Stealth Air Full Carbon, XCO Optimized Zero Suspension System, 110 mm, XC Forward Geometry, Carbon Monoblock upper link, BSA bottom bracket, tapered head tube, HHG internal cable routing, dedicated 1X drivetrain design, Boost 12x148 mm rear axle , shock mudguard, postmount rear brake mount.
|
Fork |
Rockshox SID Base 3P Remote 29, 120 mm, DebonAir, tapered steerer tube, Boost 15x110 mm axle, 35 mm tapered aluminum stanchions, offset 44 mm. Settings: 3 position remote, Low-speed rebound, air preload RockShox TwistLoc Base FullSprint 125 B1 3 Position (7 mm + 7 mm), Twist to lock, Twist to unlock
|
Shock |
RockShox SID Luxe 3P Remote in Pull DebonAir, 165x45 mm. Settings: 3 position remote,, low-speed rebound, air preload. Trunnion top mount, 30x8 mm bottom bushings
|
Shifting |
Sram Trigger SX Eagle, 12s, X-Actuation 1:1
|
Derailleur |
SRAM GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1
|
Cassette |
SRAM PG-1230, 11-50T, 12s
|
Chain |
SRAM SX Eagle, 12s, Powerlock
|
Cranks |
Sram NX Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S size: 170 mm M, L, XL size: 175 mm, CL 55
|
Brakes |
SRAM Level T, 2 piece caliper, Centerline 180 mm/160 mm IS 6 bolts one-piece rotor, steel-backed organic pad
|
Rims |
Mavic Crossmax 29, 25 mm internal width, welded rim, hookless, tubeless ready, 24 spokes
|
Front hub |
Mavic, Boost 15x110 mm, IS 6 bolts
|
Rear hub |
Mavic, Boost 12x148 mm, ID360 Ratchet system, IS 6 bolts, HG freehub
|
Spokes |
Mavic straight-pull double butted, contactless lacing
|
Tires |
Maxxis Rekon Race 29x2.35" EXO TR 120 TPI, folding bead
|
Seat post |
Onoff Sulfur 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6 mm, length 400 mm
|
Saddle |
Fizik Vento Argo X5
|
Stem |
MDK, 6061 T6 Alloy, 31.8 mm barbore, rise: +/-5°, length: S, M size: 50 mm, L size: 60 mm, XL size: 70 mm
|
Handlebars |
Onoff Sulfur 0.2, double butted 6061 alloy, rise: 4.8 mm, width: 760 mm, 9° backsweep, 0° upsweep, 31.8 mm barbore
|
Bottom bracket |
Sram DUB BSA, sealed bearings, 73 mm
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 1x12 |
Groupset | Other |
Size | S, M, L, XL |
Colour | carbon/carrera blue/midnight blue |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 120 mm |
Shock | Air |
Rear travel | 110 mm |
Telescopic seat post | no |
product ID | 265774 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews