Marin Wolf Ridge 8, mountain bike 2018
Front suspension: RockShox Lyrik RC 29 ”, 160mm Travel, Compression and Rebound Adjustment, Solo Air Spring, 110x15mm Boost Spacing, Maxle Ultimate, 51mm Offset
Rear suspension: RockShox Monarch R Debonair, High Volume Eyelet, 200x57mm, Rebound Adjustment, Custom Tune, 25.4mm x M8 Upper Hardware, Custom Lower Hardware
Rims: Stan's NoTubes Flow MK3, 29mm Inner, Welded Joint, BST Technology, Tubeless Compatible
Rear hub: Formula, 148x12mm, Quad Sealed Bearings, 6-Bolt Disc, 32H
Front hub: Formula, 110x15mm, 6-Bolt Disc, 32H
Tip: 14g Black Stainless Steel
Tires : F: WTB Vigilante 29x2.3 "R: WTB Breakout, 29x2.3", TCS Light / Fast, Tubeless Compatible
Rear derailleur: SRAM GX Eagle 12-Speed
Gearing: SRAM GX Eagle 1x12-Speed
Cranks: SRAM Descendant 6K Aluminum, Direct Mount 12-Speed 34T, Boost Spacing
Middle composition: External Sealed Cartridge Bearings
Chain: SRAM GX Eagle
Cassette: SRAM XG-1275 12-Speed, 10-50T
Front brake: Shimano XT M8000 Hydraulic Disc, 203mm Rotor
Rear brake: Shimano XT M8000 Hydraulic Disc, 180mm Rotor
Brake levers: Shimano XT M8000 Hydraulic
Handlebars: Marin Mini-Riser, 6061 Double Butted Aluminum, 25mm Rise, 780mm Width, 4º Up, 9º Back
Stem: Marin 3D Forged Alloy, 45mm
Grips: Marin Locking
Head Composition: FSA No 42 / ACB, Sealed Cartridge Bearings, 1 1/8 "x 1 1/2"
Seatpost: KS LEV SIO Dropper Post, Custom Offset Head, Southpaw Lever, Size S 120mm Travel, All Other Sizes: 150mm Travel
Saddle: WTB Volt Race
Model year | 2018 |
Gears | 1x12 |
Groupset | Shimano XT, SRAM GX |
Material | carbon fiber |
product ID | 62972 |
MTB
Size | S | M | L | XL |
---|---|---|---|---|
Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews