Liv Intrigue LT 2 29/27.5 women's bike, forged iron
Liv Intrigue LT 2 29/27.5 women's bike
Frame |
ALUXX SL-Grade aluminum front and rear triangles, 150 mm Maestro Suspension, flip chip, integrated down tube storage
|
Fork |
RockShox 35 Gold RL, 160 mm, Motion Control damper, Boost, 15x110, 110 Maxle Stealth, tapered, 44 mm offset, custom tuned for Liv
|
Shock |
Fox Float DPS Performance 185/55 mm, custom tuned for Liv
|
Shifting |
SRAM SX Eagle, 1x12
|
Derailleur |
SRAM SX Eagle
|
Cassette |
SRAM SX Eagle, 11-50T
|
Chain |
SRAM SX Eagle
|
Cranks |
SRAM SX Eagle DUB, 30T, 55 mm chainline XS: 165 mm, S: 170 mm, M: 170 mm
|
Brakes |
Tektro M745, Hydraulic Disc [F] 203 mm [R] 180 mm
|
Brake levers |
Tektro HDM-745
|
Rims |
Giant AM, tubeless ready, sleeve-joint, 30 mm inner width XS/S: [F] 29, [R] 27.5
|
Hubs |
ALLOY
|
Spokes |
stainless
|
Tires |
[F] Maxxis Minion DHF 29x2.5WT, 3C Max Terra, EXO, TR, tubeless
[R, size XS and S] Maxxis Dissector 27.5x2.4WT, 3C Max Terra, EXO, TR, tubeless |
Seat post |
Giant Contact Switch dropper, remote XS: 100 mm travel / 30.9 x 345 mm S: 125 mm travel / 30.9 x 395 mm M and L: 150 mm travel / 30.9
|
Saddle |
Liv Sylvia
|
Stem |
Giant Contact SL, 35mm XS: 40mm, S: 50mm, M: 50mm, L: 50mm
|
Handlebars |
Giant Contact SL TR35, 35mm XS: 760mm, S: 760mm, M: 760mm, L: 780mm
|
Grips |
Liv Tactal single lock-on XS/S: 120 mm, M/L: 130 mm
|
Bottom bracket |
SRAM DUB, press fit
|
Accessories |
MRP AMg CS chain guide, 3M tailgate protector, tubeless prepared
|
Model year | 2023 |
Gears | 1x12 |
Groupset | Other |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | front 29"/rear 27.5" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Air |
Rear travel | 150 mm |
Max. the width of the tyres | 2.5" |
Max. chainring size | 32t |
product ID | 230950 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews