Lapierre XR 529, model 2018
Frame XR 29 "FULL CARBON 100mm travel PRESSFIT, BOOST, METRIC, THRU AXLE
Fork ROCKSHOX REBA RL 29 "BOOST ™ 15X110 SOLO AIR 100MM + ONELOC
Shock absorber ROCKSHOX DELUXE RL 190X40 DEBONAIR MM
SRAM NX 11s derailleur
SRAM NX gearing
SRAM LEVEL front brake
SRAM LEVEL rear brake
Converter RACEFACE AEFFECT 30T DIRECT MOUNT STEEL 170mm (S), 175mm (M, L, XL)
Head assembly FSA ORBIT 1.5Z SC NO.57SC
Cassette SRAM PG1130 11-42T
SRAM chain PC1110 POWERLOCK
Handlebars LAPIERRE MTB11AFS FLAT TOP W: 720mm?: 31.8mm
Stem LAPIERRE ST112AT 7050 ALLOY 7 °?: 31.8mm L: 60mm (S, M) / 70mm (L, XL)
Seatpost LAPIERRE SP66-2 2014 ALLOY?: 31.6mm L: 400mm
Saddle LAPIERRE by VELO
Grips PRE FOAM GRIPS
FORMULA DC-7131 15x110 32H WITH TORQUE CAPS front hub
SRAM LEVEL rear hub
Front tire 2.25 MAXXIS ARDENT / 2.20 IKON FOLDING SKINWALL 60TPI TLR
Rear tire 2.25 MAXXIS ARDENT / 2.20 IKON FOLDING SKINWALL 60TPI TLR
Weight 12.3 kg
Front stroke 100mm
Rear stroke 100mm
Pedals FP917
Middle assembly SHIMANO SMBB7141A PRESSFIT
Stroke 100-125
Model year | 2018 |
Gears | 1x11 |
Groupset | SRAM NX |
Material | carbon fiber |
product ID | 49828 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews