Lapierre DH 727, model 2018
Fork: ROCKSHOX BOXXER RC 27.5 COIL 200MM SHORT MED SPRING
Muffler: ROCKSHOX VIVID COIL R2C 240x76
Derailleur: SRAM GX DH 7s MID CAGE
Cranks: SRAM DESCENDANT DH 165MM 36T + E-13 LG1 GUIDE
Center composition: SRAM PRESS FIT DH (104.5 / 107)
Cassette: SRAM PG-720 7s 11-25T
Chain: SRAM PC1110
Brakes: SRAM GUIDE RE
Wheels: SRAM CENTERLINE 200mm / 200mm
Gearing: SRAM GX DH 7s
Head composition: FSA ORBIT 1.5Z SC NO.57SC
Handlebars: LAPIERRE W: 780mm W: 20mm: 31.8mm
Grips: LAPIERRE DD34 LOCK ON
Stem: LAPIERRE DIRECT MOUNT CNC: 31.8mm L: 50mm
Seatpost: RACE FACE CHESTER 31.6x325MM
Saddle: SDG CIRCUIT DH
Front hub: FORMULA DHL92 20x110 32H
Rear hub: FORMULA DHG-150 SHIMANO DRIVER 150x12 32H
Rims: E-13 LG1 + 30C 32H, 110x20mm / LG1 + 30C 32H, 12x150mm
Tires: 27.5x2.4 HIGH ROLLER II DUAL PLY SUPER TACKY
Pedals: FP917
Model year | 2018 |
Gears | 2x7 |
Groupset | SRAM GX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 49707 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews