Kellys Swag 10 29/27.5 bicycle, quartz blue
Kellys Swag 10 29/27.5 bike
A powerful full-suspension bike, with which you can easily handle regular off-road riding and day-long trips in the mountains. Equipment with a good ratio of performance and endurance.
Frame |
KELLYS Enduro / Think Link® suspension system, 150 mm rear travel, tapered HT, internal routing, ISCG 05, mullet 29" / 27.5" wheelset, 12x148 mm Boost thru axle
|
Fork |
RockShox 35 Silver TK (29") Boost, 160 mm, Solo Air / TurnKey / Maxle Stealth 15 mm thru axle
|
Shock |
RockShox Deluxe Select+ RT, DebonAir / Open-Threshold (210x55 mm)
|
Shifting |
Shimano Deore M6100-IR Rapidfire Plus (I-Spec EV)
|
Derailleur |
Shimano Deore M6100 (direct mount)
|
Cassette |
Shimano CS-M6100-12 (10-51T)
|
Chain |
SHIMANO CN-M6100 (114 articles)
|
Cranks |
SHIMANO Deore MT510-1 (32T) - length 175 mm
|
Brakes |
Shimano Deore MT410 Hydraulic Disc
|
Brake levers |
Shimano Deore BL-M4100
|
Brake discs |
front 180 mm / rear 180 mm
|
Rims |
KLS Segador 30 SL Disc (front 622x30 / rear 584x30 / 32 holes)
|
Hubs |
SHIMANO Deore MT410-B Disc Center Lock (15x110 mm / 12x148 mm / 32 holes)
|
Spokes |
stainless steel black
|
Front tyre |
SCHWALBE Nobby Nic Performance 29x2.35" ADDIX
|
Rear tyre |
Schwalbe Nobby Nic Performance 27.5x2.35" Addix
|
Seat post |
EXAform JAG-i Remote Telescopic - diam 30.9 mm / length 485 mm, stroke 150 mm
|
Saddle |
fi'zi:k Taiga, S-alloy rails
|
Stem |
KLS Alm/En 50 - diam 28.6 mm / bar bore 31.8 mm / length 45 mm
|
Handlebars |
KLS Alm/En 70 RiseBar - diam 31.8 mm / rise 38 mm / width 780 mm
|
Grips |
KLS Poison OneLockon
|
Headset |
FSA 1.5 integrated
|
Bottom bracket |
PRESTINE Press-Fit
|
Pedals |
KLS Master
|
Chain guide |
MOZARTT Piano, ISCG 05
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 1x12 |
Groupset | Shimano Deore |
Size | M, L |
Colour | quartz blue |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" front/27.5" rear |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Air |
Rear travel | 150 mm |
Telescopic seat post | yes |
product ID | 312874 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews