Kellys Swag 10 27.5 ", model 2020
Fork: ROCK SHOX 35 Gold RL (27.5) Boost, 160mm, DebonAir / Motion Control / Maxle Stealth 15mm thru axle
Muffler: ROCK SHOX Deluxe RT, DebonAir / Rapid Recovery / Open-Pedal (230x65mm)
Head composition: FSA 1.5 integrated
Middle composition: SRAM DUB PressFit
Cranks: SRAM SX Eagle DUB X-Sync (32T) - length 170mm (S), 175mm (M - L)
Gear: SRAM NX Eagle X-Actuation Trigger
Derailleur: SRAM NX Eagle X-Horizon
Number of gears: 1x12
Cassette: SRAM PG-1210-12 Eagle (11-50T)
Chain: KMC SX Eagle (112 articles)
Brakes: SHIMANO MT400 Hydraulic Disc
Wheels: front 180mm / rear 180mm
Brake levers: SHIMANO BL-MT400
Hubs: SHIMANO MT400-B Disc Center Lock (15x110mm / 12x148mm / 32 holes)
Fixed axle: front ROCK SHOX Maxle Stealth 15x110mm / rear Mr.CONTROL 12x148mm
Rims: KLS Valor 3 Disc 584x30 (32 holes)
Tip: stainless steel black
Tires: front SCHWALBE Hans Dampf Performance 60-584 (27.5x2.35) Tubeless Ready, ADDIX, folding / rear SCHWALBE Nobby Nic Performance 60-584 (27.5x2.35) ADDIX, folding
Stem: KLS Alm / En 50 - diam 28.6mm / bar bore 31.8mm / length 45mm (S - M), 60mm (L)
Handlebars: KLS Alm / En 70 RiseBar - diam 31.8mm / rise 25mm / width 780mm
Grips: KLS Poison
Seatpost : EXAform JAG1- Remote Telescopic - diam 30.9mm / length 430mm, stroke 125mm (S) / length 485mm, stroke 150mm (M - L)
Saddle: KLS Styx
Pedals: KLS Master
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM NX, SRAM SX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 89571 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
