GT Sanction 27.5 Expert 2019 mountain bike
27.5 "mountain bike from the enduro category, RockShox Yari RC 170 mm fork, Monarch Plus R 160 mm shock absorber, Sram NX Eagle components.
Frame: COR Enduro Design, 6069-T6 Alloy 27.5 Frame, 160mm Travel Independent Drivetrain® Suspension System w / Forged Linkage, Pivots, 1.5 "Head Tube, and 12x142mm Thru Axle dropouts
Fork: RockShox Yari RC, 170mm, Charger Damper, Debonair, 15x110mm, tapered steerer, 46mm offset
Muffler: RockShox Monarch Plus R, 8.5 "X2.5", Debonaire, Rebound and Compression
Cranks: Truvativ Descendant 6K, Oak, 32T
Middle composition: SRAM Oak
Gear levers: SRAM NX Eagle with Matchmaker
Cassette: SRAM PG 1230 Eagle 11-50t
Chain: SRAM NX Eagle
Derailleur: without derailleur
Derailleur: SRAM NX Eagle
Rims: WTB STP i29 TCS, 32h
Hubs: All Terra Tall Flange Sealed Bearing 15x110 front, 12x142 rear
Pedals: without pedals
Brakes: SRAM Guide T hydro disc, 200 / 180mm Centerline Rotors, Metallic pads
Stem: Race Face Aeffec t R, 6061 Alloy, 40mm
Handlebars: Race Face Chester Alloy Riser, 20mm rise, 8 ° sweep, 5 ° rise, 780mm
Brake levers: SRAM Guide T hydro disc
Wires: Double-butted, Stainless
Tires: Schwalbe Magic mary Performance, 27.5 x 2.35 ", tubeless ready
Saddle: Fabric Scoop Shallow Sport
Seatpost: All Terra dropper, 31.6mm, 100mm (S) 130mm (M-XL)
Color: Gloss Turquoise W / Red Velvet Blue (TRQ)
Head composition: FSA Orbit 1.5ZS SC
Model year | 2019 |
Gears | 1x12 |
Groupset | SRAM NX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 73353 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews