Giant Trance 3, 2019 model
This bike is not in the basic offer for 2019, compared to the Trance 3 GE, it is equipped with a Praxis Cadet single chainring.
Color Metallic Black / Metallic Orange
AluxX SL Aluminum frame, Maestro suspension, 140 mm travel
Fork Suntour AION 35-Boost RC DS 27.5+, travel 150 mm, Boost axle 15x110 mm, OverDrive column
Shock absorber RockShox Deluxe R, Trunnion Mount
Giant Connect Trail handlebars, 780 x 31.8 mm
Giant Connect stem
Giant Contact Switch seat post, telescopic, 30.9 mm
Saddle Giant Contact (Neutral)
Shifting Shimano Deore, gears 1x10
Derailleur Shimano Deore Shadow +
Shimano MT400 brakes, 180 mm discs
Shimano MT400 brake levers
Shimano Deore cassette, 11-42 teeth
KMC X10-1 chain
Cranks Praxis Cadet, Boost, 30
Praxis BB-90 Press Fit center composition
Rims Giant AM 27.5, 30 mm inner width
Giant Tracker Performance Boost hubs, fixed axle 15x110mm and 12x148mm, encapsulated bearings
SAPI wires
Tires front: Maxxis High Roller II EXO TR, 27.5x2.5 WT, 60 TPI / rear: Maxxis High Roller II EXO TR, 27.5x2.4, 60 TPI, tubeless
Model year | 2019 |
Gears | 1x10 |
Groupset | Shimano Deore |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 80368 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews