Giant Trance 29 2 bike, dried chili/black
Giant Trance 29 2 bike
A powerful full-suspension bike, with which you can easily handle regular off-road riding and day-long trips in the mountains. Equipment with a good ratio of performance and endurance.
Frame |
ALUXX SL-grade aluminum front and rear triangles, 120 mm Maestro suspension, flip chip - Maestro, 12x148 mm thru-axle
|
Fork |
Marzocchi Z2, 130 mm, Rail damper, Boost 15x110 Kabolt, 44 mm offset, custom tuned for Giant
|
Shock |
Fox Float Performance, 185/50, custom tuned for Giant
|
Shifting |
Shimano Deore, 1x12
|
Derailleur |
Shimano Deore
|
Cassette |
Shimano Deore, 10-51T
|
Chain |
KMC X-12
|
Cranks |
Praxis Cadet M24, 30T, 55 mm chainline S: 165 mm, M, L, XL: 170 mm
|
Brakes |
Shimano Deore BL-MT401/BR-MT420, hydraulic, Shimano RT-26 rotors [F] 180 mm, [R] 180 mm
|
Rims |
Giant AM 29 tubeless ready sleeve-joint rim, 30 mm inner width
|
Hubs |
alloy, sealed
|
Spokes |
Sapim
|
Tires |
[F] Maxxis Minion DHF 29x2.5 WT, 3C MaxxTerra, EXO, TR
[R] Maxxis Aggressor 29x2.5, EXO, TR, tubeless |
Seat post |
Giant Contact Switch dropper, remote S: 125 mm travel / 30.9 x 395 mm
|
Saddle |
Giant Romero
|
Stem |
Giant Contact SL 35 S: 40 mm, M: 40 mm, L: 50 mm, XL: 50 mm
|
Handlebars |
Giant Contact SL TR35, 780x35 mm
|
Grips |
Giant Tactal Pro Single S, M: 120 mm, L, XL: 130 mm
|
Bottom bracket |
Praxis, press fit
|
Accessories |
tubeless prepared
|
Sex | Men, Unisex |
Model year | 2024 |
Gears | 1x12 |
Groupset | Shimano Deore |
Size | S |
Colour | dried chili/black |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 130 mm |
Shock | Air |
Rear travel | 120 mm |
Telescopic seat post | yes |
Max tire width | 2.6" |
Max. chainring size | 36T |
product ID | 278560 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews