Giant Trance 1, model 2019
AluxX SL Aluminum frame, Maestro suspension, stroke 140 mm
Fork FOX 36 Float Performance Elite, stroke 150 mm, FIT4 damping, Boost fixed axle 15x110 mm (KaBolt), OverDrive post
Shock absorber FOX Float DPX2 Performance, Trunnion Mount
Giant Contact SL TR35 handlebars, 780 x 35 mm, 20 mm increase
Stem Giant Contact SL 35
Seatpost Giant Contact Switch S, telescopic, 30.9 mm
Saddle Giant Contact SL (Neutral)
SRAM GX Eagle gears, 1x12 gears
SRAM GX Eagle derailleur
SRAM Guide R brakes, 180 mm discs
Brake levers SRAM Guide R
SRAM GX Eagle cassette, 10-50 teeth
SRAM XG-1275 Eagle chain
Cranks Truvativ Descendant 6k Eagle Oak, boost, converter 32 teeth
Central composition SRAM GXP Dub Press Fit
Giant AM 27.5 rims, 30 mm inner width
Giant Tracker Performance boost hubs, fixed axle 15x110 mm and 12x148 mm, encapsulated bearings
SAPI wires
Tires front: Maxxis High Roller II 3C EXO TR, 27.5x2. 5 WT, 60 TPI / rear: Maxxis High Roller II 3C EXO TR, 27.5x2.4, 60 TPI, tubeless
Model year | 2019 |
Gears | 1x12 |
Groupset | SRAM GX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 82104 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews