Giant Anthem Advanced 29er 1, model 2018
Black / Green color
Advanced Composite frame, aluminum rear construction AluxX SL, stroke 90 mm, Maestro suspension
RockShox SID RL Remote fork, stroke 100 mm, Charger Damper damping, locking from OneLoc handlebars, Boost fixed axle 15x110 mm (Maxl Stealth), OverDrive post
RockShox Deluxe RT silencer, Trunnion Mount
Giant Contact SL Trail handlebars, width 780 mm
Stem Giant Contact SL
Seatpost Giant Contact Composite, 27.2 mm
Saddle Giant Contact SL (Forward)
Shimano SLX gearing, 1x11
Shimano SLX derailleur
Shimano M6001 brakes, discs: 180 mm (front), 160 mm (rear)
Brake levers Shimano M6001 I-Spec II
Shimano SLX cassette, 11-46 teeth
KMC X11-1 chain
Shimano SLX cranks, 32-tooth converter
Central composition of Shimano PressFit
Giant XCR 1 29 "WheelSystem, carbon rims, tubeless
Hubs Giant XCR 1 29 "WheelSystem, Fixed axle boost 15x110 mm (front), 12x148 mm (rear)
Giant XCR 1 29 "WheelSystem wires
Tires Maxxis IKON EXO TR, 29x2.2, Kevlar heel, 60 TPI, tubeless
Model year | 2018 |
Gears | 1x11 |
Groupset | Shimano SLX |
product ID | 76182 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews