Giant Anthem Advanced 29 1, model 2019
Fork: FOX 32 Float SC Performance, travel 100 mm, GRIP2 damping, locking from the handlebars, Boost fixed axle 15x110 mm (KaBolt), OverDrive column
Damper: FOX Float DPS Performance, Trunnion Mount
Handlebars: Giant Contact SL XC Flat, 780 x 31.8 mm
Stem: Giant Contact SL
Seat post: Giant Contact, carbon, 27.2 mm
Saddle: Giant Contact SL (Forward )
Shifting: Shimano SLX, gears 1x11
Derailleur: Shimano Deore XT Shadow +
Brakes: Shimano Deore M6000, discs 180/160 mm
Brake levers: Shimano Deore M6000
Cassette: Shimano SLX, 11-46 teeth
Chain: KMC X11 -1
Cranks: Shimano SLX, Boost, 32-tooth derailleur
Center composition: Shimano Press Fit
Rims: Giant XCR 1 29 WheelSystem, hookless carbon, 25 mm inner width
Hubs: Giant XCR 1 29 WheelSystem, Boost fixed axle 15x110 mm and 12x148 mm
Spokes: Giant XCR 1 29 WheelSystem
Tires: Maxxis REKON Race EXO TR, 29 x 2.25, 60 TPI, tubeless
Model year | 2019 |
Gears | 1x11 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 76183 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews