Giant Anthem 2, 2018 model
AluxX SL Aluminum frame, travel 110 mm, Maestro suspension
Fork FOX 34 Rhythm, travel 130 mm, Grip Damper, Boost axle 15x110 mm, OverDrive column
FOX Float Performance Shock, Trunnion Mount
Giant Contact Trail handlebars, width 780 mm
Giant Contact stem
Giant Contact Switch seat post, telescopic, 30.9 mm
Saddle Giant Contact (Neutral)
Shifting Shimano SLX, 1x11, I-Spec II
Shimano SLX derailleur
Brakes Shimano M6001, discs 180 mm
Brake levers Shimano M6001 I-Spec II
Shimano SLX cassette, 11-46 teeth
KMC X11-1 chain
Shimano SLX cranks, 32-tooth derailleur
Shimano PressFit center composition
Giant XC -1 Wheelset, tubeless, 23 mm inner width
Hubs [front] Giant Tracker Boost, solid axle 15x110 mm, sealed bearings / [rear] Giant Tracker Boost, solid axle 12x148 mm, sealed bearings
SAPI wires
Tires Maxxis Forekaster EXO TR, 60 TPI, tubeless, width: front 2.35 / rear u 2.20
Accessories Factory Tubeless
Model year | 2018 |
Gears | 1x11 |
Groupset | Shimano SLX |
product ID | 76176 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews