Ghost SLAMR X 5.9 Jet Black / Urban Gray, model 2020
SL AMR X is based on our bestseller SL AMR, with the difference that the X models offer a few e X tra features.
Above all, they have an easily modified geometry and a larger stroke of 150/145 mm. This makes the SLAMR X the ideal bike for heavier trails and lighter enduro. The 29-inch wheels overcome every obstacle and at the same time are directionally stable, and on hill climbs you can feel the fast racing genes inherited from the SL AMR.
Wheel size: 29Material: Aluminum
Frame: SLAMR AL
Fork: RockShox 35 Gold RL 150 mm
Derailleur: SRAM NX Eagle 12-S
Cranks: Truvativ Descendant 6K Eagle X-Sync 32T
Middle composition: SRAM Pressfit OAK
Cassette: SRAM XG 1275 10-50
Chain: SRAM SX Eagle
Brakes: TRP G-Spec Trail SL 4/4 Piston 203/180 mm Disc
Handlebars: Ground Fiftyone Race 780 mm Rise 15 mm Dia. 31.8 mm
Grips: Production Privee
Stem: Ground Fiftyone Dia. 31.8 mm
Saddle: Ergon SME3 Comp
Wheels: TRP 203/180 mm
Shock absorber: Cane Creek DB Coil IL SK 145 mm
Heel : FRHG0057
Front tire: Maxxis Minion DHF 3C MaxxTerra Exo 29x2.5
Rear tire: Maxxis Minion DHR II Exo 29x2.4
Number of transfers: 12
Front tangled wheels: Syntace V30 15x110 mm
Rear tangled wheels: Syntace V30 12x148 mm
Maximum load: 120 kg
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM NX, SRAM SX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 88188 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews