Ghost Slamr 6.9 LC gray, model 2018
Wheel size: 29
Fork: Rock Shox Revelation RC Debon Air 130mm
Muffler: Rock Shox Deluxe RT Air 130mm
Derailleur: SRAM GX Eagle 12-S
Converter: Truvativ Descendant Eagle X-Sync 32
Brakes: Magura MT Thirty2 4/2 Piston 180mm Disc
Front tire: Continental Mountain King II PureGrip 29x2.2
Rear tire: Continental X-King Perf. PureGrip 29x2.2
Wheels: WTB XC i25 622x25mm 32h, 15x110mm, 12x148mm
Front hub: Formula DC-711 15x110mm
Rear hub: Formula DC-1248 12x148mm
Frame: SLAMR LC
Gear: SRAM GX Eagle
Cranks: Truvativ Descendant 6K Eagle X-Sync 32z
Cassette: SRAM XG 1275 10-51
Handlebars: Ground Fiftyone Race 780mm, rise 15mm, 31.8mm
Stem: Ground Fityone 31.8mm
Seatpost: JD Dropper Post 31.6mm
Saddle: SDG Fly Mountain
Number of speeds: 12
Front stroke: 130mm
Rear stroke: 130mm
Heel: FRHG0058
Model year | 2018 |
Gears | 1x12 |
Groupset | SRAM GX |
product ID | 43776 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
