Ghost Slamr 4.9 AL spectra yellow / night black, model 2019
Material: Aluminum
Wheel size: 29 "
Frame: SL AMR AL
Fork: SR Suntour Auron 35 RC2 PCS 130 mm
Derailleur: SRAM NX Eagle 12-S
Cranks: SRAM NX Eagle 32 T
Cassette: SRAM PG-1230 11-50
Brakes: TRP G-Spec Trail SL Gold 4/4 Piston 203/180 mm Disc
Gear: SRAM NX Eagle
Head composition: 16012
Handlebars: Ground Fiftyone Race 35 Rise Bar 780 mm Rise 20 mm Dia. 35 mm
Stem: Ground Fiftyone Dia. 35 mm
Seatpost: Satori Sorat Pre 31.6 mm
Saddle: SDG Fly Mountain
Twisted wheels: Rodi Wheelset 30 mm 15 x 110 mm // Rodi Wheelset 30 mm 12 x 148 mm
Muffler: Cane Creek DB Coil IL 130 mm
Front stroke: 130 mm
Rear stroke: 130 mm
Heel: FRHG0057
Number of speeds: 12
Front tire: Maxxis Minion DHR II MaxxTerra 29x2.30
Rear tire: Maxxis Minion SS Exo 29x2.30
Weight: 14.7kg (M)
Model year | 2019 |
Gears | 1x12 |
Groupset | Shimano Sora, SRAM NX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 63540 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews