Ghost Riot Enduro Universal 29 bike, black/red/grey
GHOST Riot Enduro Universal
A perfectly balanced aluminum frame with a low center of gravity and a rear construction made of one piece of aluminum with maximum torsional rigidity. The wiring is hidden under the protective cover of the down tube and there is integrated protection along the entire length of the chainstay. The completely newly developed repacking of the shock absorber of the rear structure called Traction Link® brings control and the necessary stiffness in the downhill passages and does not restrict the riders even when traveling uphill. Upright seat post, lowered fork and longer rear struts are the main features of the most modern geometry based on the SUPERFIT® algorithm. It indicates the optimal length of the individual frame tubes depending on the rider's height. There are 3 lift levels and a total of 7 seating levels.Frame |
RIOT AL
|
Fork |
Marzocchi Bomber Z1 170 mm
|
Shock |
Marzocchi Bomber CR 160 mm
|
Shifting |
Shimano Deore SL-M6100
|
Derailleur |
Shimano SLX RD-M7100, 12-speed
|
Cassette |
Shimano Deore CS-M6100, 10-51T
|
Chain |
Shimano DEORE CN-M6100
|
Cranks |
SHIMANO DEORE FC-M6100, 32T
|
Brakes |
Shimano Deore BR-M6120 203 mm Disc / Shimano SM-RT66 203 mm
|
Brake levers |
Shimano BL-M6100
|
Wheelset |
Syntace V30 15x110 mm / Syntace V30 12x148 mm
|
Tires |
front: Maxxis Assegai 3C MaxxGrip Exo+ 2.5
rear: Maxxis Minion DHR II 3C MaxxTerra Double Down 2.4 |
Seat post |
Eightpins hydraulic, Ø 34.9 mm
|
Saddle |
WTB Volt
|
Stem |
Ground Fiftyone, Ø 31.8 mm
|
Handlebars |
Ground Fiftyone, Ø 31.8 mm, 760 mm/15 (S), 780 mm/15 (ML), 780 mm/40 (XL)
|
Grips |
WTB Wafel
|
Headset |
Acros AZX-203
|
Bottom bracket |
Shimano BB-MT800
|
Number of speeds |
1x12
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | Shimano SLX, Shimano Deore |
Size | M, L, XL |
Colour | black/red/grey |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 170 mm |
Shock | Spring |
Rear travel | 160 mm |
product ID | 141525 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews