Ghost Riot EN AL Pro 29 bike, black/red/grey
GHOST Riot EN AL Pro 29 bike
The GHOST Riot EN Pro is a full-suspension enduro bike built on 29-inch wheels and an aluminum frame with Marzocchi Bomber suspension components, thanks to which it achieves an aggressive travel of 170/160 mm. Repacking the rear suspension, called Traction Link®, brings tons of fun, control and necessary stiffness in the downhill sections and won't limit you on the way up. Upright seat post, laid fork and longer rear struts are the main features of the most modern geometry, which is based on the SUPERFIT® algorithm developed by Ghost. It indicates the optimal length of the individual frame tubes depending on the rider's height. Precise shifting is provided by SHIMANO XT with 1x12 gears, and the precise braking effect is ensured by SHIMANO Deore BR-M6120 four-piston brakes with 203mm discs.- Perfectly balanced aluminum frame
- Super-responsive Traction Link® suspension (Virtual Pivot)
- Rear construction from one piece of aluminum with maximum torsional rigidity
- SUPERFIT® geometry
- Low center of gravity
- One-piece rockers with maximum stiffness
- Cabling hidden under the protective cover of the lower frame tube
- Integrated protection along the entire length of the chain stay
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Frame |
RIOT AL
|
Fork |
Marzocchi Bomber Z1 170 mm
|
Shock |
Marzocchi Bomber CR 160 mm
|
Shifting |
Shimano XT SL-M8100
|
Derailleur |
Shimano XT RD-M8100, 12-speed
|
Cassette |
Shimano XT CS-M8100, 10-51T
|
Chain |
Shimano XT CN-M8100
|
Cranks |
Shimano SLX FC-M7100, 32T
|
Brakes |
Shimano Deore BR-M6120 203 mm Disc / Shimano SM-RT66 203 mm
|
Brake levers |
Shimano BL-M6100
|
Rims |
WTB ST29" i30
|
Hubs |
DT Swiss 370 Classic 15x110 mm / DT Swiss 370 Classic 12x148 mm
|
Front tire |
Maxxis Assegai 3C MaxxGrip Exo+ 29x2.5"
|
Rear tire |
Maxxis Minion DHR II 3C MaxxTerra Double Down 29x2.4"
|
Seat post |
Eightpins hydraulic, Ø - 34.9 mm
|
Saddle |
WTB Volt
|
Stem |
Ground Fiftyone, Ø 31.8 mm
|
Handlebars |
Ground Fiftyone, Ø 31.8 mm 760 mm/15 mm (S) 780 mm/25 mm (M-XL)
|
Grips |
WTB Wafel
|
Headset |
Acros Blocklock 135° AZX-582
|
Bottom bracket |
BSA 73
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x12 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
Size | M, L, XL |
Colour | black/red/grey |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 170 mm |
Shock | Spring |
Rear travel | 160 mm |
Telescopic seat post | yes |
product ID | 201416 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews