Ghost Riot 7, 2015 model
We designed the award-winning RIOT so that you can get everywhere on it. The enormous potential of our patented RIOT-Link system brings perfect drive neutrality and enables optimal control both in fast passages and on the most winding paths in trails. In addition to the RIOT-Link system, the bike also has other high-end features, such as the Disconnect Brake Mount system, internally routed cables, carbon protective film in critical areas and the new X12 axle mount. Expect RIOT!
Year - 2015
Frame - Riot 27.5 UHM/HM Carbon
Fork - Fox 32 Float FIT Performance CTD 130 mm 15 mm thru-axle
Damper - Fox Float CTD BV LV 130 mm
Derailleur - Shimano XT Plus 10-Speed
Derailleur - Shimano XT
Shifting - Shimano XT SL
Brakes - Shimano XT Disc 180 mm SM-RT76
Cranks - Shimano XT 38-24
Cassette - Shimano XT 11-36
Handlebars - GHOST Low Rizer super light 720 mm 31.8 mm
Stem - GHOST AS-GH3 31.8 mm
Braided wheels - Easton Vice Wheelset 15/12 mm
Tires - Schwalbe Nobby Nic 2.25
Saddle - Selle Italia X1
Seatpost - Rock Shox Reverb Stealth 31.6 mm Travel 100 mm (XS) 125 mm (S-XL)
Number of speeds - 20
Wheel size - 27.5"
Weight - 11.9 kg
Front stroke - 130 mm
Rear stroke - 130 mm
Model year | 2015 |
Gears | 2x10 |
Groupset | Shimano XT |
Material | carbon fiber |
product ID | 28366 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews