FELT Decree 5 green, model 2019
Fork: Rock Shox Reba RL, Boost 110x15
Muffler: Rock Shox Delux R
Stroke: 150/140 mm
Gear: Sram NX, 12 speeds
Derailleur: Sram NX Eagle, 12 speeds
Cassette: Sram NX Eagle, 12 speeds, 11-50 teeth
Cranks: Sram NX Eagle, 34 teeth, (S - 170mm, M / XL - 175mm)
Head composition: semi-integrated, 1.125 "-1.5"
Stem: Devox, +/- 7 °, (S / M - 60mm, L / XL - 70mm)
Handlebars: Devox, 6061 Alu, 800mm
Brakes: Shimano MT201, hydraulic, 180 / 160mm
Wheels: Alu
Tires : Maxxis Minion DHF, 27.5x2.35 "
Seatpost: KS e-Ten i dropper, telescopic, 30.9, (stroke: S / M - 100mm, L / XL - 125mm)
Seat: WTB Volt Comp
Weight: 12.75 kg
Model year | 2019 |
Gears | 1x12 |
Groupset | SRAM NX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 77330 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews