Cannondale Scalpel-Si Carbon SE 2 2018 mountain bike
29" wheels, carbon frame, fork travel 120mm, rear travel 115mm, 1x12 speed
This is a bicycle from the exhibition. There are minor scratches on the bike. A single piece in a large M.
NEW SE MODEL
An even more capable Scalpel for trail riding thanks to a revised specification. The rear stroke is increased to 115 mm, the front fork has a stroke of 120 mm. In addition, brakes with 180 mm discs, wider tires, a larger range of gears and a telescopic seatpost!
SHORT BUT EFFECTIVE
The Scalpel-Si and its asymmetrically shifted Ai drive provides an ultra-short rear structure, and thus maximum traction and a lively driving performance without compromise. The Ai package also includes a wide tire clearance, full 2x compatibility and a stiffer and stronger rear wheel.
LOW WEIGHT
With Ballistec carbon construction and a System Integration approach, the Scalpel Si is the world's lightest and stiffest full-suspension XC bike.
NO EXTRA STUDS
Transversely stiffer and lighter than a traditional rear structure with studs. Flexible Zero-Pivot rear struts are a hallmark of the Scalpel.
NEW MODERN GEOMETRY
Composed and stable for hard descents and at the same time still fast and nimble on technical descents. The Scalpel-Si's new modern geometry brings you the best of both.
Model year: 2018
Wheel size: 29"
Frame: Scalpel SE, 115mm, BallisTec Carbon, Zero Pivot seatstay, Carbon Link, PF30, 1.5 Si head tube, Ai Offset
Fork: Fox Float 34, Performance Elite Series, 120mm, FIT-4 Damper, 3 Position Adjust, 110x15, 51mm Offset
Damper: Fox Float Performance DPS EVOL SV, 3 Position Adjust 115mm Travel
Cranks: Truvativ Stylo Eagle 6K, 32t
Center composition: Cannondale Alloy PressFit30
Shifters: SRAM GX Eagle 12-speed Trigger
Cassette: SRAM 1275 Eagle 10-50t 12-speed
Chain: SRAM GX Eagle
Derailleur: SRAM GX Eagle 12-speed
Rims: Stans Notubes ZTR ARCH S1 28hole, Tubeless Ready, 26mm inner
Hubs: Formula 110x15 Boost front, Formula 142x12 with XD driver, rear
Pedals: N/A
Brakes: SRAM Level TL hydro disc, 180/180mm, Centerline Rotors
Handlebars: Cannondale C3 riser, Alloy, 4° upsweep, 9° backsweep, 760x15mm
Stem: Cannondale C1, 6061 Alloy, 1-1/8", 60mm, 31.8, 5°
Head assembly: Cannondale HeadShok Si
Brake levers: SRAM Level TL
Wires: DT Swiss Competition
Tires: Maxxis Ardent 2.4"/2.25", Dual Compound, EXO Protection, Tubeless Ready, gumwall
Saddle: Fabric Scoop Flat Race w/ Titanium Rails
Seatpost : RaceFace Aeffect Dropper, 31.6mm, 125/150mm travel.
Sizes: M
Color: Jet Black w/ Charcoal Gray - Gloss/Matte (GRY)
Carbon frame
Lightweight, stiff and at the same time still flexible material that absorbs shocks well and increases comfort. A higher price is to be expected.
| Model year | 2018 |
| Gears | 1x12 |
| Groupset | SRAM GX |
| Material | carbon fiber |
| product ID | 58198 |
Mountain, city, cross-country
| Size | Rider height |
|---|---|
| XS | 147-160 cm |
| S | 157-170 cm |
| M | 165-177 cm |
| L | 175-187 cm |
| XL | 182-195 cm |
| XXL | 193-205 cm |
| Size | Rider height |
|---|---|
| 44 | 154-160 cm |
| 48 | 160-170 cm |
| 51 | 165-175 cm |
| 54 | 170-180 cm |
| 56 | 177-185 cm |
| 58 | 182-193 cm |
| 61 | 190-200 cm |
| Size | Rider height |
|---|---|
| Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Sale -21% Leatt HydraDri 5.0 ProClip cycling shoes, black
from 142 €
-21%
RRP 199 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews