Cannondale Scalpel 29 Carbon Race 2016 mountain bike, EXHIBITION PIECE, size M
29 "wheels, stroke 100 mm, carbon frame, carbon Lefty fork, 1x11 drive, off-road triumph.
The Ballistec CARBON frame in combination with the Lefty carbon fork is light and hard at the same time. The racing 29 "geometry with a very short rear structure allows great control of the bike and is one of the best XC fully in the world.
Sclapel 29 Carbon Race is equipped with Cannondale HollowGram Si cranks, RockShox Monarch XX shock absorber, which is lockable from the handlebars and has a stroke of 100 mm. Sclapel Carbon 1 offers 11 pinions at the rear and a single gearbox at the front. Magura MT-Race brakes take care of the braking effect. The tangled carbon wheels of Cannondale CZero Superlight give the wheel lightness and dynamism in every step.
Sclapel 29 Carbon 1 is designed for XC racers and marathoners who want to deliver maximum performance in the field and have comfort in the field.
Model year: 2016
Wheel size: 29 "
Frame: Scalpel 29, 100mm, BallisTec Hi-MOD Carbon, Zero Pivot seatstay, PF30, 1.5 Si head tube
Fork: Lefty 2.0 Carbon, 100mm, XLR Isolated Damper Technology with XC + tune and XLoc Full Sprint remote, 50mm offset
Silencer: RockShox Monarch XX, 100mm, Full Sprint remote
Cranks: Cannondale HollowGram Si, hollow forged, BB30, 32t SpideRing
Middle composition: Cannondale Alloy PressFit30
Gear levers: SRAM XX1
Cassette: SRAM XG-1180, 10-42, 11-speed
Chain: SRAM PCX1, 11-speed
Derailleur: SRAM XX1
Rims: Cannondale CZero Superlight Hi-Impact Carbon, Tubeless Ready, 28hole, 23mm ID
Ammunition : CZero Straight Pull, Lefty 60 front, 39-point engagement rear, 28h
Pedals: not available
Brakes: SRAM Guide Ultimate w / metallic pad 180mm / 160mm
Stem: Cannondale C1, 6061 Alloy, 1.5 ", 31.8, -5 deg.
Head composition: Cannondale HeadShok Si
Handlebars: Cannondale C1 flat, carbon, 700mm
Brake levers: SRAM Guide Ultimate w / carbon lever, cartridge bearing w / Matchmaker
Wires: CZero, double butted, straightpull
Tires: Schwalbe Racing Ralph EVO Snakeskin, 29x2.1 ", folding, tubeless ready
Saddle: Prologo Nago Evo X8 w / Tirox Rails
Seatpost: Cannondale C2 Carbon, 31.6x350mm (S, M) 400mm (L, X)
Sizes: M
Model year | 2016 |
Gears | 1x11 |
Groupset | SRAM XX1, SRAM XX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 31094 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews