Cannondale Habit 2 SE 27.5, model 2018, gray
Fork: RockShox Pike RC 130mm, Solo Air Spring, Charger Damper BOOST 110x15, Fixed axle, 46mm offset
Damper: Fox Float DPS Performance EVOL SV, 3 Position opening
Cranks: TRUVATIV DESCENDANT Eagle 7K
Center composition: Cannondale Alloy PressFit30
Shifting: SRAM GX Eagle 12-speed Trigger
Cassette: SRAM 1275 Eagle 10-50 teeth, 12-speed
Chain: SRAM GX Eagle w/ Powerlock, 12-speed
Derailleur: N / A
Derailleur: SRAM GX Eagle, 12-speed
Rims: WTB Frequency Race i29 TCS 27.5, Tubeless preparation, Inner diameter 29mm
Hubs: HollowGram, 110x15 front, 142x12mm solid axle rear, DT-Swiss Internals, 28 holes
Pedals: NA
Brakes: SRAM Guide R, 180 / 180mm discs, SramCenterline discs
Head assembly: Cannondale HeadShok Si
Stem: Cannondale C1, 6061 Aluminum, 60mm, 31.8, 5°
Handlebars: Cannondale C3 riser, Aluminum, 4° upsweep, 9° backsweep, 760x15mm
Brake levers: SRAM Guide R
Spikes: DT Swiss Competition, Straight Pull
Tires : Maxxis DHF 27.5x2.3", 3C Compound, Tubeless Ready front, Ardent 27.5x2.25" tubeless preparation rear, gumwall
Saddle: Fabric Scoop Shallow Elite
Seatpost : RaceFace Aeffect Dropper, 31.6mm, 125 / 150mm travel
Model year | 2018 |
Gears | 1x12 |
Groupset | SRAM GX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 51971 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews