Wilier 503X Comp, model 2019
Fork: SUNTOUR RAIDON 29 ”100MM, FODERI ALU 32MM REMOTE CONTROL, TAPERED, THRU AXLE 15MM
Gearing: SHIMANO - DEORE, SL-M610, 10S
Derailleur: SHIMANO - SLX, RD-M670, 10S
Derailleur: SHIMANO - DEORE, FD-M618
Cassette: SHIMANO - HG50, 10S, 11 / 36T
Cranks: SHIMANO - FC-M617 36X22T
Chain: SHIMANO - HG-54, 114 LINK
Brakes: SHIMANO - BR-M355
Wheels: MICHE MT-X 29 ”DISC, 180MM FRONT + 160MM POST, 6 BOLTS
Tires : VITTORIA - BARZO 29 ”X 2.2
Handlebars: PROMAX - HB3018
Stem: PROMAX - DA282
Seatpost: PROMAX - SP264
Saddle: SELLE ITALIA - Q-BIK
Weight: 13.3 KG. ± 5%
Model year | 2019 |
Gears | 2x10 |
Groupset | Shimano SLX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 84072 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews