Wilier 101X XT 1x12 SID MT501, model 2020
Fork: ROCK SHOX SID RL
Wheels: Miche MTX
Cranks: SHIMANO XT FC-M8100-1 32T 1X12
Cassette: SHIMANO SLX 12S 10-51T
Gearing : SHIMANO SLX KSLM7100
Derailleur: SHIMANO XT 1X12 RD-M8100 DIRECT ATT
Chain: SHIMANO SLX 1X12 118 LINKS
Brakes: SHIMANO XT M8000
Tires : VITTORIA BARZO RIGID 29X2.25 "
Stem : RITCHEY COMP
Handlebars: RITCHEY MTN
Saddle: SELLE ITALIA X1
Seatpost: RITCHEY CMP 2-BOLT V2 ALLOY
Head composition: RITCHEY CMP PRD15862
Wheels: SHIMANO M8000 180 MM / 160 MM 6 BOLTS
Center composition: SHIMANO XT PRESS FIT
Weight: 11.4 kg +/- 5%
Model year | 2020 |
Gears | 1x12 |
Groupset | Shimano XT, Shimano SLX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 106164 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews