Rock Machine Manhattan 40-29 bike, gloss radioactive yellow/black/blue
Rock Machine Manhattan 40-29 bike
A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
Frame |
Alloy Al-6061 T6 Custom tubing, Fun Ride Geometry, Shark Spine EVO2 29er, BB BSA 73 mm, OLD 135x9, Disc Brake Post Mount, Fender&Kickstand Ready Dropout, Replaceable RD Hanger, Inner Cable Routing
|
Fork |
ZOOM 525S AMS, 1-1/8", Coil, QR Type, 100 mm travel
|
Shifting |
SHIMANO ST-EF505-2L, 2-speed SHIMANO ST-EF505-7R, 7-speed
|
Derailleur |
Shimano Altus RD-M310
|
Derailleur |
SHIMANO ALTUS FD-M315-TS, TOP SWING, DUAL-PULL
|
Cassette |
SHIMANO CS-HG200-7, 12-32T
|
Chain |
KMC Z8.3
|
Cranks |
SAMOX SAC38731SS, 36-22T
|
Brakes |
SHIMANO ST-EF505/BR-MT200, 160/160 rotor, hydraulic disc brake
|
Rims |
Stars J20S, 32H
|
Front hub |
Shimano TX HB-TX505, 32H, Center Lock, QR Type
|
Rear hub |
SHIMANO TY FH-TY505-7, 32H, CENTER LOCK, M10x135 mm, QR Type
|
Spokes |
Sapim Galvanized Black
|
Tires |
WTB Ranger Comp, 29x2.00"
|
Seatpost |
ONE1 Sport Alloy, SP C207, 30.9x350 mm
|
Saddle |
ONE1 XC
|
Stem |
ONE1 TDS-C342 Alloy, 31.8xE60 mm, +3°
|
Handlebars |
ONE1 Alloy, MTB AL-325BT, 6° upsweep, 9° backsweep, 25 mm rise, 700 mm, 31.8 mm
|
Grips |
ONE1 VL-G1325D2
|
Headset |
FSA No.10 Semi-Cartridge, 1-1/8"
|
Bottom bracket |
Shimano BB-UN101 122.5mm, BSA, shell 73mm
|
Pedals |
Marwi SP-610
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 3x9 |
Groupset | Shimano Altus |
Size | S, M, L, XL |
Weight | 14.7 kg |
Colour | gloss radioactive yellow/black/blue |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
Rider weight limit | 115 kg |
product ID | 253333 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
