Orbea ONNA 30 27.5 bicycle, blue-purple/white
Orbea ONNA 30 27.5 bicycle
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, unpaved roads and in easy terrain. If you ride more demanding terrain or more frequently, you will need to fine-tune more often.
Frame |
Orbea Onna Alloy, Dropout 9x135, BSA BB, Internal cable routing
|
Fork |
SR Suntour XCM RL-Coil 100 mm QR
|
Derailleur |
Shimano Deore M4120 SGS Shadow
|
Derailleur |
Shimano Deore M6025 31.8 mm
|
Cassette |
Shimano CS-M4100 11-42t 10-Speed
|
Chain |
KMC X10
|
Cranks |
Alloy forged 26x36t 10S
|
Brakes |
Shimano MT200 Hydraulic Disc
|
Wheelset |
Orbea Black Rock 23c Disc
|
Tires |
Kenda K1153 2.35" 30TPI
|
Seat post |
Alloy 27.2 Offset 0
|
Saddle |
Selle Royal 2058 DRN
|
Stem |
Alloy 31.8 mm interface 7º
|
Handlebars |
Alloy Flat 31.8 mm 720 mm
|
Headset |
1"-1/8 Semi-Integrated
|
Pedals |
VP-537 Black
|
Rear shock lock |
Suntour lockout
|
Shift levers |
Shimano Deore M4100
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 2x10 |
Groupset | Shimano Deore |
Size | XS |
Colour | blue violet/white |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 27.5" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
product ID | 175416 |
Road
Size | 47 | 49 | 51 | 53 | 55 | 57 | 60 |
---|---|---|---|---|---|---|---|
Rider height (cm) | 155 - 160 | 160 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
Size | XS | S | M | L | XL | XXL |
---|---|---|---|---|---|---|
Rider height (cm) | 155 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 155 - 170 | 165 - 180 | 179 - 190 | 185 - 198 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 150 - 160 | 160 - 170 | 170 - 180 | 180 - 190 | 190 - 200 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews