Mondraker Podium Carbon, carbon / white / red, model 2021
frame: Podium 29 Stealth Air Carbon, XC Forward Geometry, BSA bottom bracket, tapered head tube, HHG internal cable routing, Boost 12x148mm rear axle, dedicated 1X DRIVETRAIN design, Flatmount brake compatible,
fork: RockShox SID SL Select RL 29, 100mm, Charger, Debonair, tapered steerer tube, Boost 15x110mm axle, 32mm aluminum stanchions, offset 44mm. Settings: OneLock 2 position remote compression (open / lock), low-speed rebound, air preload
head composition: ONOFF Titan tapered for 1-1 / 8 to 1-1 / 2 head tube, ACB sealed bearings, top 41.8x30.5x8x45x45, bottom 51.9x40x8x45x45
derailleur: Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-actuation 1: 1
gears: Sram Trigger GX Eagle, 12s, X-actuation 1: 1
brake levers: Sram Level TLM, Direct Link actuation, tooled reach adjust, lever pivot bushings
cranks and converters: Truvativ Stylo 7K Eagle, Boost, DUB axle, Direct mount chain ring, S size: 170mm, M / L / XL size: 175mm
middle composition: Sram OAK BSA, sealed bearings, 73mm
handlebars: ONOFF Sulfur 0.2, double butted 6061 alloy, rise: 4.8mm, width: 740mm, 9 backsweep, 0 upsweep, 31.8mm Barbore ONOFF Twin, 1lock-on, 135mm
representative: MDK, 6061 T6 Alloy, 31.8mm Barbora, rise: +/- 5, length: sizes S / M: 60mm, size L: 70mm, size XL: 80mm
seatpost: ONOFF Sulfur 0-R, 6061 T6 Alloy, 3D forged, diameter 27.2mm, length 400mm
saddle: Fizik Antares R7
hub front: DT 370, Boost 15x110mm, IS 6 bolts
rear hub: DT 370, Boost 12x148mm, 3 Pawl system, IS 6 bolts, XD freehub
chain: Sram NX Eagle, 12s, Powerlock
cassette: Sram XG-1275, 10-50T, 12p
wires: DT Champion, straightpull
rims: DT Swiss X1900 Spline 29, 25mm internal width, sleeved aluminum, tubeless ready, 28 Spokes
tires: Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead
Model year | 2021 |
Gears | 1x12 |
Groupset | SRAM GX, SRAM NX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 113254 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews