Mondraker CHRONO CARBON R NX 29, carbon/light blue/flame red, model 2018
weight: 10.90 kg
frame: chrono 29er stealth 2.0 carbon, pf30 bottom bracket, tapered head tube, hhg internal cable routing, 12x142mm rear axle, comfort flat chainstays flatstays design.
fork: rockshox judy gold 29 rl solo air 100mm, tapered head tube, 15x110mm axle. settings: rebound, compression adjustment at low-speed to lock, air preload.
head composition: onoff titan internally tapered for 1-1-8” -> 1-5” head tube. top bearing 41.8x30.5x8x45?x45?, bottom 51.9x40x8x45?x45?.
derailleur: SRAM nx type 3 with roller bearing clutch and cage lock, long cage, x-horizon system.
derailleur: -
shifting: sram trigger nx1, 11s. zero loss technology, exact actuation.
brake levers: sram level t, brake lever reach adjust, 2 bolts clamp matchmaker compatible, ambidextrous lever mount.
cranks and derailleurs: sram nx1 6000 series aluminum, 30mm axle, chain ring with direct mount, standard boost, 175mm crank arm length.
middle composition: sram gxp xr, sealed bearings, 73mm.
ruler: onoff notion 0.2. aluminum 6061 t6 double butted. 4.8mm rise, 710mm width, 9? backsweep, 0? upsweep, 31.8mm barrel
stem: onoff notion. 3d forged 6061 t6 aluminum, --6? angle, 31.8mm barrel. size m 80mm length, size l-xl 90mm length
pedals: -
saddlebag: onoff notion 0-yr. 2d forged head 2014 t6 aluminum. 31.6mm diameter. 400mm length
saddle: mondraker design.
front hub: mdk-xp1, 15x110mm axle, sealed bearings, is 6 bolts
rear hub: mdk-xp1, 12x142mm axle, sealed bearings, is 6 bolts, xd freehub
chain: sram pc-1110 11s.
cassette: sunrace csms8, 11-46t, 11s.
wires: cn stainless steel round
rims: mdk-xp1 29", 21mm internal width, tubeless ready, 32 spokes
tires: maxxis pace 29x2.10, 60tpi, wire.
.
Model year | 2018 |
Gears | 1x11 |
Groupset | SRAM GX, SRAM NX |
product ID | 53121 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews