Mondraker Chrono Carbon, model 2020
Fork: RockShox Judy Gold RL 29 Boost Remote, stroke 100 mm
Head composition: ONOFF Titan tapered Internal
Derailleur: Sram SX Eagle X-Horizon Type3 1x12 speed
Gear: Sram SX Eagle Trigger right 12 speeds
Brake levers: Shimano MT201
Cranks and transducers: Sram SX Eagle DUB Boost DM, 34 teeth
Middle composition: Sram OAK PF30 73 mm
Handlebars: ONOFF Sulfur 0.2, width 740 mm
Stem: Mondraker XC, inclination 5 °
Seatpost : ONOFF Sulfur 0-R, diameter 27.2, length 400 mm
Saddle: Mondraker XC Series
Front hub: MDK Disc Pre Boost, axis 15x110 mm
Rear hub: MDK Disc Pre Boost, axis 12x148 mm
Chain: Sram SX Eagle
Cartridge: Sram Eagle XG1230 11-50 teeth, 12 speeds
Spikes: CN stainless
Rims: MDK-XP1 29 TL25, entwined set
Tires: Maxxis Ikon, 29 "x 2.20"
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM SX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 88512 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
