MARIN San Quentin 1 gray / black
Fork: SR Suntour XCM32 Boost 15x110mm Spacing, 120mm Travel, Lock Out, 27.5 ", Bolt-On Thru-Axle
Rims: Marin, Double Wall Alloy, 29mm Inner, Pinned Joint, Disc Specific, 32H Tubeless Compatible
Rear hub: Forged Alloy, 141mm Width, Disc, 32H, Shimano Standard Freehub Body
Front hub: Forged Alloy, 110x15mm, Disc, 32H
Tip: 14g Black Stainless Steel
Tires: Vee Tire Co, Flow Snap, 27.5x2.6 ", MPC Compound, Wire Bead
Rear derailleur: MicroShift RD-M9195M, 9 Speed, With Clutch
Gear levers: MicroShift SL-M9195-R, 1x9 with Bearings
Crankshaft Gear: Marin Forged Alloy, Integrated Steel 32T Narrow Wide Chainring, Boost Spacing
Center composition: Sealed Cartridge Bearing, Square Taper
Chain: KMC X-9
Cassette: Sunrace, 9 Speed, 11-46T
Front brakes: Tektro M275 Hydraulic Disc, 180mm Rotor
Rear brakes: Tektro M275 Hydraulic Disc, 180mm Rotor
Brake levers: Tektro M275 Hydraulic Disc
Handlebars: Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
Stem: Marin 3D Forged Alloy, 45mm
Handles: Marin MTN, Closed End
Head Composition: FSA No 57E, Semi-Sealed Cartridge Bearings, 1 1/8 "x 1 1/2"
Seatpost: Marin Alloy, 30.9mm
Saddle: Marin Speed Concept
Pedals: Nylon Platform
Model year | 2022 |
Gears | 1x9 |
Groupset | Other |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 144964 |
MTB
Size | S | M | L | XL |
---|---|---|---|---|
Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews