Marin San Quentin 1 27.5 bike, grey/black/blue
Choose personal collection at the store and decide on the spot.
MARIN San Quentin 1 27.5 bicycle
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, unpaved roads and in easy terrain. If you ride more demanding terrain or more frequently, you will need to fine-tune more often.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
27.5” wheels
Universal size for a wide range of bicycles. The advantage is better cross-country ability, higher traction and comfort, and still good dexterity. Slightly heavier.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Coil fork
Provides adequate comfort and is usually installed on bicycles for recreational and less demanding riding. The disadvantage is its relatively heavy weight.
| Frame |
Series 2 6061 Aluminum, Double Butted Frame, 141 mm Open Dropout, 73 mm Threaded BB
|
| Fork |
SR Suntour XCM34 Boost 15x110 mm Spacing, 130 mm Travel, Lock Out, 27.5", Bolt-On Thru-Axle
|
| Shifting |
MicroShift SL-M9195-R, 1x9 with Bearings
|
| Derailleur |
MicroShift RD-M9195M, 9 Speed, With Clutch
|
| Cassette |
Sunrace, 9 Speed, 11-46T
|
| Chain |
KMC X-9
|
| Cranks |
Marin Forged Alloy, Integrated Steel 32T Narrow Wide Chainring, Boost Spacing
|
| Brakes |
Tektro M275 Hydraulic Disc, 180/180 mm Rotor
|
| Rims |
Marin, Double Wall Alloy, 29 mm Inner, Pinned Joint, Disc Specific, 32H Tubeless Compatible
|
| Front hub |
Forged Alloy, 110x15 mm, Disc, 32H
|
| Rear hub |
Forged Alloy, 141 mm Width, Disc, 32H, Shimano Standard Freehub Body
|
| Spokes |
14g Black Stainless Steel
|
| Tires |
Vee Tire Co, Flow Snap, 27.5x2.6", MPC Compound, Wire Bead
|
| Seat post |
Marin Alloy, 30.9 mm
|
| Saddle |
Marin Speed Concept
|
| Stem |
Marin 3D Forged Alloy, 45 mm
|
| Handlebars |
Marin Mini-Riser, 6061 Double Butted Aluminium, 780 mm Width, 28 mm Rise, 5º Up, 9º Back
|
| Grips |
Marin MTN, Closed End
|
| Headset |
FSA No 57E, Semi-Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|
| Bottom bracket |
Sealed Cartridge Bearing, Square Taper
|
| Pedals |
Nylon Platform
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x9 |
| Groupset | Other |
| Size | S, M, L, XL |
| Colour | grey/black/blue |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 27.5" |
| Brakes | Hydraulic disc brakes |
| Fork | Spring |
| Fork travel | 120 mm |
| Telescopic seat post | no |
| product ID | 195458 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Sale -21% Leatt HydraDri 5.0 ProClip cycling shoes, black
from 142 €
-21%
RRP 199 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews