Marin Pine Mountain 1 29 bike, blue/yellow/orange
Choose personal collection at the store and decide on the spot.
Marin Pine Mountain 1 29 bike
Frame |
Series 2 Double Butted CrMo, 29" Wheels, Boost 141x9 mm Open Dropout, 73 mm Threaded BB, Plentiful Gear Mounts
|
Fork |
RockShox Recon RL, 120 mm Travel, Compression and Rebound Adjustment, Alloy Tapered Steerer, Solo Air Spring, 110x15mm Boost Spacing, Maxle Stealth, 51 mm Offset
|
Rear derailleur |
Shimano Deore 11-Speed
|
Cassette |
Sunrace 11-Speed, 11-51T
|
Chain |
KMC X11
|
Crankset |
Marin Forged Alloy 1x11, Hollow Spindle, Steel Narrow Wide 32T Chainring, 76 mm BCD
|
Front brake |
Shimano MT420, 4-Piston, Hydraulic Disc, 180 mm Rotor
|
Rear brake |
Shimano MT400, 2-Piston, Hydraulic Disc, 160 mm Rotor
|
Brake levers |
Shimano MT400 Hydraulic
|
Rims |
Alloy Double-Wall, Offset Spoke, 32 mm ID, Tubeless Compatible
|
Front hub |
Forged Alloy, 110x15 mm, Disc, 32H
|
Rear hub |
Forged Alloy, 141x9 mm, Disc, 32H
|
Spokes |
14 g Black Stainless Steel
|
Seat post |
Marin Alloy, 30.9 mm
|
Saddle |
Marin Pine Mountain Trail
|
Stem |
Marin 3D Forged Alloy, 35 mm
|
Handlebars |
Marin Bedroll Bar, 50mm Rise, 780 Width, 10˚ Backsweep, 6˚ Upsweep
|
Grips |
Marin BearPaw Locking
|
Headset |
FSA Orbit ITA, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|
Bottom bracket |
External Sealed Cartridge Bearings
|
Pedals |
Nylon Platform
|
Tires / tubes |
Vee Tire Flow Snap, 29x2.6", Wire Bead
|
Shift levers |
Shimano Deore 11-Speed
|
Sex | Men, Unisex |
Model year | 2021 |
Gears | 1x11 |
Groupset | Shimano Deore |
Colour | blue/yellow/orange |
Material | steel |
Wheel material | Aluminium |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 120 mm |
Telescopic seat post | no |
product ID | 144949 |
MTB
Size | S | M | L | XL |
---|---|---|---|---|
Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
