Marin Palisades Trail 26 bike, black
Marin Palisades Trail 26 bike
A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
Frame |
6061 Aluminum, Triple Butted Hydro-Edge Top and Down Tubes, Double Butted E4 Anti-Flex Seat and Chain Stays
|
Fork |
Rock Shox XC 30 TK, 100mm, coil spring preload with Turnkey adjustment
|
Shifting |
SRAM X5, 3x10 Speed Trigger
|
Derailleur |
SRAM X5
|
Derailleur |
SRAM X5
|
Cassette |
SRAM PG-1030, 11-36, 10 Speed
|
Chain |
SRAM PC-1030, 10-Speed
|
Cranks |
FSA GammaDrive, 44/33/22T
|
Rear brake |
Tektro Draco 2 Hydraulic Disc, 7"/6" Rotor
|
Brake levers |
Tektro Hydraulic
|
Rims |
Alex XD-Comp
|
Hubs |
Formula, 32 Holes
|
Spokes |
Gauge Black Stainless
|
Tires |
Continental X-King, 26" x 2.2"
|
Seat post |
Comp Alloy Micro Adjust, 2014 Alloy, 15 mm Offset, 400 mm
|
Saddle |
WTB Silverado Sport
|
Stem |
Marin OS Alloy Threadless, 31.8 mm Bar Clamp
|
Handlebars |
Double Butted 6061 Alloy, OS-31.8 mm, 25.4 mm Rise
|
Grips |
Marin Dual Density
|
Headset |
FSA No.10, 1 1/8”
|
Bottom bracket |
FSA MegaExo System Integrated with Crankset
|
Sex | Men, Unisex |
Model year | 2013 |
Gears | 3x10 |
Groupset | SRAM X5 |
Size | 19" (L) |
Colour | black |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 26" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 147830 |
MTB
Size | S | M | L | XL |
---|---|---|---|---|
Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews