Marin Bolinas Ridge 2 27.5 bike, red/yellow
Marin Bolinas Ridge 2 27.5 bike
Frame |
Series 1 6061 Aluminum SHOT Tech, 27.5” Wheels, Disc Mounts
|
Fork |
SR Suntour XCT HLO 27.5”, Hydraulic Lockout, 100 mm Travel (80 mm Travel Size XS)
|
Shifting |
Shimano ST-EF41 8-Speed
|
Derailleur |
Shimano Altus
|
Derailleur |
Shimano Tourney
|
Cassette |
SunRace 8-Speed, 11-32T
|
Chain |
KMC Z8
|
Cranks |
Forged Alloy, 42/34/24T
|
Brakes |
Tektro Aires Mechanical Disc, 160/160 mm Rotor
|
Brake levers |
Shimano w/ Integrated Shifters
|
Rims |
Maddux Double Wall, Machined Sidewall
|
Hubs |
Formula, 6-Bolt Disc, 32H
|
Spokes |
Black Stainless Steel
|
Tires |
Vee Tire Galaxy, 27.5x2.1"
|
Seat post |
Marin Alloy
|
Saddle |
Marin MTB
|
Stem |
Marin Alloy
|
Handlebars |
Marin Riser
|
Grips |
Marin Dual Density
|
Headset |
FSA No.10-P
|
Bottom bracket |
Sealed Cartridge Bearing, Square Taper
|
Pedals |
Resin Platform
|
Sex | Men, Unisex |
Model year | 2016 |
Gears | 3x8 |
Groupset | Shimano Altus, Shimano Tourney |
Size | L |
Colour | red, orange |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 27.5" |
Brakes | Mechanical disc brakes |
Fork | Spring |
Fork travel | 100 mm |
product ID | 147816 |
MTB
Size | S | M | L | XL |
---|---|---|---|---|
Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
