Marin Bobcat Trail 5 29" bike, black/orange/silver
Choose personal collection at the store and decide on the spot.
Marin Bobcat Trail 5 29" bike
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, unpaved roads and in easy terrain. If you ride more demanding terrain or more frequently, you will need to fine-tune more often.
Frame |
Series 2 6061 Aluminum, 27.5" or 29” Wheels, Low Standover, 68 mm BB shell, 135 mm Forged Dropouts, IS Chainstay Disc Mount, Internal Housing & Dropper Post Routing
|
Fork |
SR Suntour XCR LOR-DS, Thru-Axle, 120 mm Travel, Hydraulic Lockout, Damping Adjustment, 46 mm (29") Offsets
|
Shifting |
Shimano Deore 11-Speed
|
Derailleur |
Shimano Deore 11-Speed w/Clutch
|
Cassette |
Sunrace 11-Speed, 11-51T
|
Chain |
KMC X11
|
Cranks |
Marin Forged Alloy 1x11, Hollow Spindle, Steel Narrow Wide 32T Chainring
|
Rear brake |
Shimano BR-MT201 Hydraulic Disc 180/160 mm Rotor
|
Rims |
Marin Aluminum Double Wall, 29 mm Inner, Pinned Joint, Disc Specific, Tubeless Compatible
|
Hubs |
Forged Alloy, Disc, 32H
|
Spokes |
14 g Black Stainless Steel
|
Tires |
WTB Trailboss Comp, 29x2.25”, Wire Bead
|
Seat post |
Marin Alloy, 30.9
|
Saddle |
Marin MTB
|
Stem |
Marin Alloy, 31.8 mm Clamp, 45 mm
|
Handlebars |
Marin 31.8 Riser, 12 mm Rise, 780 mm Width
|
Grips |
Marin MTB, Closed End
|
Headset |
FSA No.10-P
|
Bottom bracket |
External Sealed Cartridge Bearings
|
Pedals |
Nylon Platform
|
Sex | Men, Unisex |
Model year | 2022 |
Groupset | Shimano Deore |
Gears | 1x11 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 29" |
Fork travel | 120 mm |
Material | aluminium |
Size | M, L, XL |
Colour | black/orange/silver |
Fork | Spring |
Wheel material | Aluminium |
product ID | 144901 |
MTB
Veľkosť | S | M | L | XL |
---|---|---|---|---|
Výška (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Veľkosť (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Výška (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
comment Reviews