Liv Tempt 29 5 women's bike, snow drift
Liv Tempt 29 5 women's bike
A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
Frame |
Aluxx-Grade Aluminium, disc
|
Fork |
SR Suntour XCE 100 mm
|
Shifting |
Shimano SL-M315, 2x7
|
Derailleur |
Shimano Tourney
|
Derailleur |
Shimano M315
|
Cassette |
Shimano MF-TZ500, 14-28T
|
Chain |
KMC Z7
|
Cranks |
ProWheel forged, 22/36T
|
Brakes |
TKB-172, mechanical [F] 160 mm, [R] 160 mm rotors
|
Brake levers |
RS360A, mechanical
|
Rims |
Giant GX03V 29, alloy, double wall, 21 mm inner width
|
Hubs |
Giant Tracker Sport
|
Spokes |
Stainless, 14g
|
Tires |
Kenda Booster 29x2.2", wire bead
|
Seat post |
Giant Sport, 30.9 mm
|
Saddle |
Liv Sport
|
Stem |
Giant Sport, 7-degree
|
Handlebars |
Giant Connect Trail, 31.8 mm
|
Grips |
Giant Sole-O
|
Bottom bracket |
cartridge
|
Pedals |
MTB caged
|
Sex | Women |
Model year | 2023 |
Gears | 2x7 |
Groupset | Shimano Tourney |
Size | M |
Colour | snow drift |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Mechanical disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 170438 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews