Liv Bliss 27.5 women's bike, desert sage
Frame: ALUXX-Grade Aluminum
Fork: SR Suntour XCE 28, coil, preload, 75 mm travel
Handlebars: Giant Sport, alloy, 25.4 mm
Grips: Giant Sole-O
Stem: Giant Sport, alloy, 15-degree
Seat post: Giant Sport, 300 x 30.9 mm
Saddle: Liv Custom
Pedals: platform
Shifting: Shimano EF41, 3x7
Derailleur: Shimano Tourney
Derailleur: Shimano Tourney
Brakes: MTB linear pull
Brake levers: Shimano EF41
Cassette: Shimano MF-TZ500, 14x34
Chain: KMC Z7
Cranks: ProWheel forged, 24/34/42
Central composition: cartridge
Rims: Giant alloy
Hubs: alloy, sealed bearing
Tip: stainless, 14g
Tires: Giant Quickcross, 27.5x2.1
Model year | 2022 |
Gears | 3x7 |
Groupset | Shimano Tourney |
Material | aluminium |
Brakes | V-brakes |
Fork | Spring |
product ID | 184815 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews