Lapierre ProRace CF 6.9 29 bike, brown
Lapierre ProRace CF 6.9 29 bike
LAPIERRE ProRace is a powerful, lightweight hardtail with geometry adapted to cross-country disciplines, which will be appreciated by both beginners and advanced riders. The racing mountain bike model has a carbon frame sitting on 29-inch wheels. However, the carbon frame is not the only novelty of the ProRace series. Thanks to the 3D Tubular concept, you disperse vibrations between the seat and handlebars, for greater comfort the seat tube is not directly connected to the seat stay and the frame has fully integrated cabling, while the cable entry is integrated in the head tube.Serious sports equipment, suitable for passionate cyclists who like to ride regularly, are not afraid of more demanding terrain and dare to stand at the start of local races. The bike equipment of this category is aimed at 100% reliability, durability and performance.
Frame |
New Prorace 29" carbon, pressfit, boost, thru axle 12x148 mm
|
Fork |
RockShox SID SL Select Charger RemoteLockout Debonair 15 mm 100 mm Gloss black
|
Shifting |
SRAM NX Eagle 12s
|
Cassette |
SRAM PG1210 Eagle 11-50T 12s
|
Chain |
SRAM SX EAGLE 12s
|
Cranks |
SRAM NX Eagle DUB 32T Chainline 55mm 170mm (S) / 175mm (M, L, XL)
|
Brakes |
SRAM Level T black with Stealth-a-majig / -
|
Rims |
Rodi Tryp 25 tubeless ready, 25-622 / Rodi Tryp 25 tubeless ready, 25-622
|
Hubs |
Fastace DF813 6-bolt / Fastace DR813 6-bolt
|
Front tire |
Maxxis Rekon Race EXO TR 29x2.35"
|
Rear tire |
Maxxis Rekon Race EXO TR 29x2.35"
|
Seat post |
Lapierre alloy forged, Ø: 27.2 mm, L: 400 mm
|
Saddle |
Fizik Taiga black
|
Stem |
Lapierre 7050 alloy, 7°, Ø: 31.8 mm, L: 60 mm (S, M), 70 mm (L, XL)
|
Handlebars |
Lapierre alloy 6061 Top flat, Width: 740 mm, Ø: 31.8 mm
|
Grips |
Lapierre foam grips small (S), large (M, L, XL)
|
Pedals |
NW 91K Steel cage
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | SRAM NX, SRAM SX |
Size | S, M, L, XL |
Colour | brown |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 151076 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews