Kellys Vanity 80 29"
Frame size: M/L
Fork: SR SUNTOUR XCR32 RLR Air (29), 100mm, air / Remote Speed Lockout
Main composition: semi-integrated
Central composition: cartridge (122.5mm)
Cranks: SAMOX (36x26T) - length 170mm (M), 175mm (L)
Shifting: SHIMANO Deore (021) SL-M5100-L / M4100-R Rapidfire Plus
Derailleur: SHIMANO Deore M618 (34.9mm)
Shifter: SHIMANO (021) Deore M4120 (direct mount)
Number of gears: 20
Cassette pinion: SHIMANO CS-HG50-10 (11-36T)
Chain: KMC X10 EL (110 links)
Brakes: SHIMANO MT200 Hydraulic Disc
Brake discs: front 160mm / rear 160mm
Brake levers: SHIMANO BL-MT200
Hubs: SHIMANO TX505 Disc Center Lock (32 holes)
Rims: KLS Draft Disc 622x21 (32 holes)
String: stainless steel
Tires: IMPAC Ridgepac 54-622 (29x2.10)
Stem: KLS Active - diam 28.6mm / bar bore 31.8mm / 8° / length 75mm (M), 90mm (L)
Handlebars: KLS Active RiseBar - diam 31.8mm / rise 18mm / width 620mm (M), 660mm (L)
Grips: KLS Advancer 2Density
Seatpost: KLS Active - diam 30.9mm / length 400mm
Saddle: KLS Ebony Women
Pedals: alloy
Model year | 2021 |
Gears | 2x10 |
Material | aluminium |
Brakes | Hydraulic disc brakes |
Fork | Air |
Telescopic seat post | no |
product ID | 124546 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews