Kellys TNT 30, model 2016
frame size 430mm (17 ") / 480mm (19") / 530mm (21 ")
fork SR SUNTOUR M3030 (29), 75mm, coil spring
semi -integrated main composition
medium cartridge composition (122mm)
handles SR SUNTOUR XCE (42x34x24) - length 170mm (17 "), 175mm (19" - 21 ")
shifting SHIMANO ST-EF51-8 EZ-fire Plus
derailleur SHIMANO M190 (diam 34.9mm)
SHIMANO Acera M360 inverter
number of transfers 24
cassette pinion SHIMANO CS-HG200-8 (12-32)
KMC Z7 chain (112 links)
brakes APSE Artek Mechanical Disc
brake discs front 160mm / rear 160mm
brake levers SHIMANO ST-EF51-8 EZ-fire Plus
KLS Firework Disc cartridges (32 holes)
KLS Draft Disc 622x19 rims (32 holes)
string stainless steel black
tires INNOVA 54-622 (29x2.10)
stem KLS Expert - diam 28.6mm / bar bore 31.8mm / 7 ° / length 70mm (17 "), 90mm (19" - 21 ")
handlebars KLS Expert RiseBar - diam 31.8mm / width 680mm (17 "), 700mm (19"), 720mm (21 ")
KLS Advancer 2Density handles
seatpost KALLOY - diam 30.9mm / length 350mm (17 "), 400mm (19" - 21 ")
saddle KLS Sentinel
plastic pedals
product ID | 15802 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews