Kellys TNT 10, model 2016
frame size 430mm (17") / 480mm (19") / 530mm (21")
fork SR SUNTOUR M3030 (29), 75mm, coil spring
head. composition semi-integrated
medium cartridge composition (122mm)
SR SUNTOUR XCC cranks (42x32x22) - length 170mm (17"), 175mm (19" - 21")
shifting SHIMANO ST-EF51-7 EZ-fire Plus
derailleur SHIMANO M190 (diam 34.9mm)
shifter SHIMANO Altus M310
number of gears 21
pinion SHIMANO MF-TZ31 (14-34)
chain KMC Z51 (112 links)
brakes APSE Artek V-brake
brake levers SHIMANO ST-EF51-7 EZ-fire Plus
brake cables DRIVING Force SCS (SlickCableSystem)
KLS Drive hubs (32 holes)
rims KLS Draft 622x19 (32 holes)
stainless steel string
tires INNOVA 54-622 (29x2.10)
stem KLS Expert - diam 28.6mm / bar bore 31.8mm / 7° / length 70mm (17"), 90mm (19" - 21")
handlebar alloy RiseBar - diam 31.8mm / width 660mm (17"), 680mm (19"), 700mm (21")
KLS Advancer 2Density handles
seatpost KALLOY - diam 30.9mm / length 350mm (17"), 400mm (19" - 21")
KLS Sentinel saddle
plastic pedals
product ID | 15804 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews