Kellys Spider 70 29 bike, black
Kellys Spider 70 29 bike
Frame |
KELLYS Alutec RRC 29 - Race Ready Concept
|
Fork |
SR SUNTOUR XCM HLO (29), 100 mm, coil / Speed Lockout
|
Shifting |
Shimano Altus SL-M2010-9 Rapidfire Plus
|
Derailleur |
SHIMANO Altus M2000 (direct mount)
|
Derailleur |
SHIMANO Altus M2020 (34.9 mm)
|
Cassette |
Shimano CS-HG200-9 (11-34T)
|
Chain |
KMC X9 (108 links)
|
Cranks |
SHIMANO Alivio MT101-2 (36x22T) - length 170 mm (S), 175 mm (M - XL)
|
Brakes |
Shimano MT200 Hydraulic Disc
|
Brake levers |
Shimano BL-MT200
|
Brake discs |
front 160 mm / rear 160 mm
|
Rims |
KLS Draft Disc 622x21 (32 holes)
|
Hubs |
Shimano TX505 Disc Center Lock (32 holes)
|
Spokes |
steel
|
Tires |
IMPAC Ridgepac 54-622 (29x2.10)
|
Seat post |
KLS Active - diam 30.9 mm / length 300 mm (S - M), 350 mm (L - XL)
|
Saddle |
KLS Sentinel 2
|
Stem |
KLS Active - diam 28.6 mm / bar bore 31.8 mm / 8° / length 75 mm (S - M), 90 mm (L - XL)
|
Handlebars |
KLS Active RiseBar - diam 31.8 mm / rise 18 mm / width 660 mm (S), 680 mm (M - XL)
|
Grips |
KLS Advancer 2Density
|
Pedals |
ALLOY
|
Headset |
semi-integrated
|
Bottom bracket |
cartridge (122 mm)
|
Sex | Men, Unisex |
Model year | 2021 |
Gears | 2x9 |
Groupset | Shimano Alivio, Shimano Altus |
Size | S, M, L, XL |
Colour | black |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 124668 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
