Kellys Spider 70 27.5 bike, yellow
Kellys Spider 70 27.5 bike
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, unpaved roads and in easy terrain. If you ride more demanding terrain or more frequently, you will need to fine-tune more often.
Frame |
KELLYS Alutec RRC 27.5 - Race Ready Concept
|
Fork |
SR SUNTOUR XCM HLO (27.5), 100 mm, coil / Speed Lockout
|
Shifting |
Shimano Altus SL-M2010-9 Rapidfire Plus
|
Derailleur |
SHIMANO Altus M2000 (direct mount)
|
Derailleur |
SHIMANO Altus M2020 (34.9 mm)
|
Chain |
KMC X9 (108 links)
|
Cranks |
SHIMANO Alivio MT101-2 (36x22T) - length 170 mm (S), 175 mm (M)
|
Brakes |
Shimano MT200 Hydraulic Disc alebo KLS 1600 Hydraulic Disc
|
Brake levers |
Shimano BL-MT200
|
Brake discs |
front 160 mm / rear 160 mm
|
Rims |
KLS Draft Disc 584x21 (32 holes)
|
Hubs |
alloy / SHIMANO TX505 Disc Center Lock (32 holes)
|
Spokes |
steel
|
Tires |
IMPAC Ridgepac 54-584 (27.5x2.10)
|
Seat post |
KLS Active - diam 30.9 mm / length 300 mm
|
Saddle |
KLS Sentinel 2
|
Stem |
KLS Active - diam 28.6 mm / bar bore 31.8 mm / 8° / length 75 mm
|
Handlebars |
KLS Active RiseBar - diam 31.8 mm / rise 18 mm / width 660 mm (S), 680 mm (M)
|
Grips |
KLS Advancer 2Density
|
Pedals |
ALLOY
|
Headset |
semi-integrated
|
Bottom bracket |
cartridge (122 mm)
|
Cassette pinion |
SHIMANO CS-HG200-9 (11-34T) or DTS-9 (11-34T)
|
Sex | Men, Unisex |
Model year | 2021 |
Gears | 2x9 |
Groupset | Shimano Alivio, Shimano Altus |
Size | S, M |
Colour | yellow |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 27.5" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 124654 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
